Crossbow

From Cantr II Wiki
Revision as of 00:24, 31 January 2007 by Ceselb (talk | contribs)

Jump to: navigation, search
Crossbow
Manufacturing
Object typeWeapons
Skill usedManufacturing weapons
Time2 day(s)
Objectscrossbow prod
bowstring
crossbow stirrup
crossbow stock
crossbow trigger
bow iron
revolving nut
Toolsstone, bronze or regular hammer
regular or bronze screwdriver
Rot and repair
Rot84 points per day
per day of use: Unknown (hard)
Repair588 points per hour
Holdable object
General properties
Attack42
Skillweight80%
Weight950 grams
Visibleyes

Description and uses

The crossbow is the most powerful weapon in Cantr. However, its weight, fast rot rate and complex construction may make the steel battle axe or claymore the better choice.

Real-life context

A crossbow consists of a prod (similar in appearance to a bow) mounted on a stock similar to a rifle stock, which has a mechanism to wind and shoot its bolts. These bolts are typically called quarrels, and do not depend upon lift as arrows do. The stock and trigger of hand-held firearms may have been copied from crossbows.

Crossbow bolts must be made to have consistent weights as the mechanical process of engaging a bolt forces a more uniform process than that of using a bow and arrow. This consistent performance was part of what made the crossbow historically a significant force in warfare.

A crossbow contains a string which is held in place by a nut when the bolt is loaded and the cross bow is engaged (referred to as at full cock). Typically, the nut is at the end of the shelf (also called the bolt rest).

The prod ("bow") and stock of a crossbow were made of good hardwood, such as oak or hard maple. The central European bows were rather exotic as they were constructed of inlays as well as specialized woods. The prod is attached to the stock with hemp rope, linen, whipcord, or other strong cording. This cording is called the bridle of the crossbow. Much as a horse's bridle, it tends to loosen over time, and must be carefully respliced when appropriate.

The crossbow shelf is a flat section above the stock with a straight groove for the bolt to rest upon and travel along as it is shot.

The strings for a crossbow are typically made of strong fibers that would not tend to fray. According to W. F. Patternson, whipcord was very common; however linen, hemp, and sinew were used as well. Even cotton was tried with some success.

The crossbow also includes a trigger, which was later incorporated into rifles, muskets and other firearms. Triggers are known to have been used on crossbows from the early 1400s. Leonardo da Vinci designed many complicated triggers for crossbows, ultimately producing a "hair trigger" that could be shot with very little finger strength.

Crossbow bolts are lighter than arrows, but must be sealed with a varnish to ensure their consistent weight. They also typically only have two fletches per bolt instead of three commonly seen on arrows. This prevents them from snagging on the crossbow nut as they are shot.

The above information was taken from the Wikipedia article at http://en.wikipedia.org/wiki/crossbow.

Images