Difference between revisions of "Revolving nut"
From Cantr II Wiki
m |
m |
||
| Line 4: | Line 4: | ||
Objects: none | Objects: none | ||
<br> | <br> | ||
| − | Tools needed: | + | Tools needed: {{peen hammer}}, [[bronze chisel]] or [[iron chisel]], [[steel flatter]] or [[bronze flatter]], [[bronze set hammer]] or [[steel set hammer]], [[sledgehammer]] |
<br> [[Category:Semi-finished_products]] | <br> [[Category:Semi-finished_products]] | ||
<br> | <br> | ||
Used in the manufacture of the following:<br> | Used in the manufacture of the following:<br> | ||
[[crossbow]] | [[crossbow]] | ||
Revision as of 22:23, 25 December 2005
Construction
Days needed: 1
Raw materials needed: 20 grams of steel
Objects: none
Tools needed: bronze or steel peen hammer, bronze chisel or iron chisel, steel flatter or bronze flatter, bronze set hammer or steel set hammer, sledgehammer
Used in the manufacture of the following:
crossbow
