Difference between revisions of "Revolving nut"
From Cantr II Wiki
m |
m |
||
| Line 4: | Line 4: | ||
Objects: none | Objects: none | ||
<br> | <br> | ||
| − | Tools needed: [[peen hammer]], [[bronze chisel]] or [[iron chisel]], [[steel flatter]] or [[bronze flatter]], [[bronze set hammer]] or [[steel set hammer]], [[sledgehammer]] | + | Tools needed: [[bronze peen hammer]] or [[steel peen hammer]], [[bronze chisel]] or [[iron chisel]], [[steel flatter]] or [[bronze flatter]], [[bronze set hammer]] or [[steel set hammer]], [[sledgehammer]] |
<br> [[Category:Semi-finished_products]] | <br> [[Category:Semi-finished_products]] | ||
<br> | <br> | ||
Used in the manufacture of the following:<br> | Used in the manufacture of the following:<br> | ||
[[crossbow]] | [[crossbow]] | ||
Revision as of 19:41, 25 December 2005
Construction
Days needed: 1
Raw materials needed: 20 grams of steel
Objects: none
Tools needed: bronze peen hammer or steel peen hammer, bronze chisel or iron chisel, steel flatter or bronze flatter, bronze set hammer or steel set hammer, sledgehammer
Used in the manufacture of the following:
crossbow
